Acrylic Resin Simple Roughing Tool with Carbide Cutter Unhandled (12" Long AR SR)

Simple Woodturning Tools SKU: AR SR


Available Now!

Acrylic, Resin and Hybrid projects have changed the woodturning landscape. Traditional carbide tipped tools did not perform well with these new materials, so we set out to make a solution. The birth of our Acrylic/Resin (AR) tool line came as a result of a lot of trials (and errors), turning all types of man-made and hybrid projects. The goal was to create tools that could be used to turn any of the man-made materials we could find, while giving the turner as much creative artistic ability as possible. A one size fits all approach did not produce the desired results across all the different materials available, including hybrid pieces. A nod back to a few early woodturning techniques with the development of carbide tools used like traditional gouges also proved to be a very successful and great approach. 

Watch our Tool Demonstrations here: How to use AR Tools


This simple to use tool with a square negative rake cutter on a square shaft is ideal for roughing and making straight lines and flat surfaces. 

  • Tool is held flat on the tool rest
  • ½” Square Tool Shaft with 15mm Square Negative Rake Carbide Cutter (search for AR SR for replacements)
  • This tool will work in the Simple Hollowing System.

    A few things to keep in mind:

    1. Turning acrylics takes longer than wood. 
    2. Shearing cuts proved to be very successful, where scraping cuts were not.
    3. Introduce your cutting edge slowly, try not to “stab” the wood as plastics can shatter with this technique.
    4. Increase your lathe speed and slow your tool presentation to the blank. 
    5. Work from the ends inward.

    Make light cuts to reduce chip outs. Increase your aggressiveness as you get the feel for it.