4 Full Size Tools - Rougher, 2 Detailers and Finisher with Carbide Cutters and 1 Handle - 26.5" Overall

Simple Woodturning Tools SKU: FSP4 SR90 Handle 63

$201.49

Available Now!

2 Detailers and Shear Cutter with this set.

You get all these tools in this set:

1. SR = Simple Rougher
2. S90D = Simple 90° Detailer
3. S55D = Simple 55° Detailer
4. SSCF = Simple Shear Cutting Finisher - 5/8" Round Shaft

Carbide Cutter Details Here

These full-size carbide tipped wood turning tools are 12" long when unhandled. When used in the handle, the tools are 9.5" long and the overall tool and handle length is 26.5". The tool and handle together weigh 2 lbs 5 oz. These tools will work in the Simple Hollowing System.

The carbide tips on these tools are designed for turning wood. Click Here to see the tools designed for turning Acrylic/Resin/Epoxy. You can swap out the cutter on the SR tool in this set with a negative rake angle cutter. The SSCF tool is excellent on both wood and resin or epoxy projects.

Tool Use:

The Simple Rougher carbide tool makes roughing much simpler & less physical as most of the shock created by interrupted cuts is absorbed in the tool rest instead of your hands & arms.

The  Simple 90° Detailer is for detail work such as beads and cutting perfectly square inside corners. Also a great tool for rapid material removal especially inside a bowl.

The Simple 55 Detailer carbide tool that provides a much higher level of woodturning creativity.

The Simple Shear Cutting Finisher (5/8" Round Shaft) is a finishing tool that leaves and excellent surface finish so sanding is reduced to a minimum. Requires a bit of practice to master, but is often the favorite tool of them all.

Full Size Tool Details:

Square shaft tools are CNC machined from ½” square stainless steel, making them stronger, stiffer and less likely to roll than round shaft tools. The 5/8" round Simple Shear Cutting Finisher is CNC machined from solid stainless steel. That allows it to be rotated about it's axis so the cutter can be presented to the work at an angle, giving you that shear cutting action.  These full size tools feature an overall length of 12", with a handle tang of ½" diameter x 2½" length.

Tool Engraving:

Each square Simple Woodturning Tool is engraved so you know exactly what tool you have. That makes finding replacement cutters very simple! Look for authentic Simple Woodturning Tool replacement cutters.

  • SR = Simple Rougher
  • S90D = Simple 90° Detailer
  • S55D = Simple 55° Detailer
  • SSCF = Simple Shear Cutting Finisher (5/8" Round Shaft)

Handle Details:

The most beautiful lathe tool handle on the market, 100% USA made by American craftsman. CNC machined from solid aircraft aluminum for balance, durability, and to last for years. Covered with a soft, comfortable foam rubber grip to reduce hand cramping during long turning sessions and for great tool control. Overall length is 17"; outside diameter is 1 3/8"; tool opening is ½" diameter. Tools can be easily changed by loosening the two stainless steel set screws.

Benefits of Carbide Lathe Tools:

Simple to use for all skill levels making woodturning fast and more enjoyable. You can focus on your project and not on techniques or sharpening. No long learning curve or expensive sharpening equipment. You can begin turning as soon as your box arrives because each tool comes with a very sharp, rotatable carbide cutter. Just rotate the cutter head ¼ turn for a clean, sharp edge and you are back to turning wood.

Video Demonstrations:

Replacement carbide cutters are available HERE.

Every woodturning tool in this package will work in our Simple Hollowing System.