The perfect size resin mold for turning a handle for an ice cream scoop, pizza cutter, bottle opener, pie server and much more!
Dimensions:
Inside Height: 6"
Inside Diameter: 2"
Wall Thickness: 0.25"
Using this silicone mold, combine your wood pieces with liquid resin, pressure pot, demold & start turning. Simple and quick to mount with a glue hub and waste block, start turning quickly.
Recommendations:
- Only use epoxy resins (we like Total Boat tabletop epoxy resin)
- Use a pressure pot to remove air bubbles from the resin. (4 hours minimum or overnight based on what resin you use and it's cure time)
- Dried wood scraps are ideal for best results (if you have punky wood, we suggest turning using the SSCF Mini)
- We've had good results using Mica powders to tint our resin
- Turning with tailstock support is always the best practice
- Finish: we like to use a clear coat of epoxy, waterlox or similar. We find a thin coat of resins covers any imperfections, and is food safe if that's important for your project.
- Mount using a glue hub and waste block, because it's quick and there's no wasted wood or resin from a mortise or tenon.
Here is a short video of an ice cream scoop being turned:
Using a Pressure Pot with Our Silicone Molds
We strongly recommend using a pressure pot every time you pour a mold. The pressure pot compresses the air bubbles in your resin, making them so small you can’t see them. This helps you get a solid blank with little to no voids—saving time and frustration later when you’re turning.
At our shop, we use the California Air Tools 365CW Pressure Pot, which is a 5-gallon model and works great for most projects. California Air Tools also makes a 2.5-gallon and a 10-gallon version, so you can choose the size that best fits your molds and workspace. This pot can be pressurized using an air compressor with a hose that has a 1/4" quick connect fitting.
If you choose not to use a pressure pot, you may end up with bubbles or voids in your casting. These can be tricky to repair and may cause issues while turning. Using a pressure pot is the best way to ensure a clean, solid blank every time.

